| specifications︰ | 1. Setting of function
You must withdraw defence to set, “du,du” is normal when you operate, “du,du,……” is false.
1. Set number of alarm telephone
Setting key +1+*+group number (1~5)+*+phone number +# (the first number is from network with computerized alarming center , this number needn’t to use without alarming center )
Setting of extension: Setting key +1+*+group number (1~5)+*+phone number +*entension number+#(input again when you want to change)
2. Setting of host machine: Setting key +1+*+group number +(6)+user code +#(this function for network)
3. delete phone number : Setting key +1+*+group number +*+#, example: delete the second group, Setting key +1+*+2+*+#
4. Set leaving word for alarm: the time for leaving word can exceed 10 seconds . Keep the setting key for about 5seconds, the indication lamp is on, you can start to record. You loose your hand to stop or auto stop after 10 seconds, the indication lamp is off.
5. Test for leaving word record: setting key +5+*pick up your phone, you can hear your leaving word.
6. Delete leaving word record: repeat leaving word for alarm to delete original record.
7. Change password: setting key +0+*+( ) password +*+new password +#.
8. Setting of alarm whistler of host machine: setting key +2+*+1+*+0+#.
9. Cancel of alarm whistler of host machine: setting key +2+*+1+*+1+#. (you must arrange defence before setting)
10. Setting of remote alarm whistler: setting key +2+*+2+*+0+#.
11. Cancel of remote alarm whistler: setting key +2+*+2+*+0+#.
12. Both of alarm whistler and remote alarm whistler : you can set Both of alarm whistler and remote alarm whistler.
13. Four defence area : except the fore area can’t be controller by remote controller or host machine, the other inner defence area, out defence area and garage area are all controlled .
14. Function of system reset: setting key +4+*password +# (after reset the system will be alarm whistler, remote alarm whistler, no password when you withdraw defence, delay 8 seconds when arrange defence ,delay 8seconds when alarm, no detection when hang up.
15. Add password when withdraw defence: setting key +2+*+3+1+#(this function is no effect for remote controller)
16. No password when withdraw defence: setting key +2+*+3+0+#(this function is no effect for remote controller)
17. Selection of delay time when arrange defence: setting key +2+*+4+*+(0~9)+#(1=1*8S,0=10*8S)
18. Selection of delay time when alarm: setting key +2+*+5+*+(0~9)+# (1=1*8S, 0 is no delay time)
19. Priority function of alarm: you need’t set up (It will hang up and automatically dail to give an alarm when the telephone is communicating)
20. Sartup of detection function of the phone circuitry: setting key +2+*+6+*+1+# (After startup it will whistler when the phone is failure, or the phone line is cut off , or the phone is short circuit)
21. close up of detection function of the phone circuitry: setting key +2+*+6+0+# (After startup it will not whistler when the phone is failure, or the phone line is cut off, or the phone is short circuit)
22. Inner 4.8V rechargeable battery: turn on the charge switch to “ON”, it will automatically charge when the voltage is lower, it will automatically stop charge when it is enough. (Only for XY-2000 model)
2. Method of use
Arrange defence and withdraw defence: you can pass the nofocusrect> button remote controller or “withdraw defence’ button on the host machine at home. When the master lock the door and go out , press the” ” button to arrange defence, when you go home you first press the “ button to withdraw defence and open the door. When you have a rest at night, you must press the “ ”button on the remote controller or “arrange defence” button on the host machine to arrange defence.
Urgent alarm function: when an accident happen, you press the “ “button on the remote controller or “help” button on the host machine, the system will enter urgent alarm status, whistle and automatically give an alarm. When you press “ ‘ button,it will be no whistle.
Deal with the alarm: when an accident happen and whistle, the syatem will automatically dial the phone you have set up,the called phone incept the alarm,press the “#,#”button to affirm it,the host machine will stop the dial and close the whistle, it will arrange defence again.If the called phone don’t press the “#,#” button,the system will hang up after play the record 4 times,and it will dial all phone repetition, until the called phone press the “#,#” button or “arrange defence” button on the host machine loose or the “ “ button on the remote controller loose. You can press the “*” to play the record.
Locale monitor: when the called phone incept the alarm, you can press the “6” button to monitor locale, press the “*” button to play the record repetition,”#,#” button to exit and come back to arrange defence. The monitor time is 32S,press the “6” button to add 32S,and so on.
Setting of remote:when the user go out and forget arrange defence,you can use the fixup phone or mobile to dial the host machine phone, you canb hear the “du,du” after six bell, the host machine automatically turn on,input the password and press “#”button, “B” show the password is true.If you don’t press button after input password in 15S,the host machine will automatically hang up.”du du du du du du” show the password is false after input password. (the host machine will hang up automatically three false). After input the true password you can operate according to the following:
“1” set the system is arrange defence status
“2” set the system is withdraw defence status
“3” set the system alarm with whistle
“4” set the system alarm without whistle
“5” start the whistle
“6” start the locale monitor
“#.#” affirm the instruction and exit the remote control
“*” play the record
3. Use method of remote controller:
The first arrange defence: press the ” “ button , the inner speaker pronounce a long “D” sound, it show all the defence area is arrange defence.
The second arrange defence:press the “ ” button for 2S,the speaker pronounce two short “D” sound, it show the outside area is withdraw defence, the inner area is arrange defence.
The withdraw defence button: press the “ ” , the speaker pronounce three short “D” sound, it show all area is withdraw defence, and stop all alarm in defence area or fire defence area.
Silence button: press the “ “, the speaker pronounce a long and a short “D” sound, it show the system is alarm without whistle.(the extension speaker is not on duty)
Urgent alarm button: press the” “button on the remote controller or “help” button on the host machine, the system will enter urgent alarm status.
Remark: when you set the alarm without whistle, you must press the arrange defence button and press the silence button. If you want Silence and Urgent alarm, you first press the silence button and press urgent alarm button. You can’t use the remote controller and host machine at the same time when you want silence function, otherwise this function will be in validation. |
|
|
1. Setting of function
You must withdraw defence to set, “du,du” is normal when you operate, “du,du,……” is false.
1. Set number of alarm telephone
Setting key +1+*+group number (1~5)+*+phone number +# (the first number is from network with computerized alarming center , this number needn’t to use without alarming center )
Setting of extension: Setting key +1+*+group number (1~5)+*+phone number +*entension number+#(input again when you want to change)
2. Setting of host machine: Setting key +1+*+group number +(6)+user code +#(this function for network)
3. delete phone number : Setting key +1+*+group number +*+#, example: delete the second group, Setting key +1+*+2+*+#
4. Set leaving word for alarm: the time for leaving word can exceed 10 seconds . Keep the setting key for about 5seconds, the indication lamp is on, you can start to record. You loose your hand to stop or auto stop after 10 seconds, the indication lamp is off.
5. Test for leaving word record: setting key +5+*pick up your phone, you can hear your leaving word.
6. Delete leaving word record: repeat leaving word for alarm to delete original record.
7. Change password: setting key +0+*+( ) password +*+new password +#.
8. Setting of alarm whistler of host machine: setting key +2+*+1+*+0+#.
9. Cancel of alarm whistler of host machine: setting key +2+*+1+*+1+#. (you must arrange defence before setting)
10. Setting of remote alarm whistler: setting key +2+*+2+*+0+#.
11. Cancel of remote alarm whistler: setting key +2+*+2+*+0+#.
12. Both of alarm whistler and remote alarm whistler : you can set Both of alarm whistler and remote alarm whistler.
13. Four defence area : except the fore area can’t be controller by remote controller or host machine, the other inner defence area, out defence area and garage area are all controlled .
14. Function of system reset: setting key +4+*password +# (after reset the system will be alarm whistler, remote alarm whistler, no password when you withdraw defence, delay 8 seconds when arrange defence ,delay 8seconds when alarm, no detection when hang up.
15. Add password when withdraw defence: setting key +2+*+3+1+#(this function is no effect for remote controller)
16. No password when withdraw defence: setting key +2+*+3+0+#(this function is no effect for remote controller)
17. Selection of delay time when arrange defence: setting key +2+*+4+*+(0~9)+#(1=1*8S,0=10*8S)
18. Selection of delay time when alarm: setting key +2+*+5+*+(0~9)+# (1=1*8S, 0 is no delay time)
19. Priority function of alarm: you need’t set up (It will hang up and automatically dail to give an alarm when the telephone is communicating)
20. Sartup of detection function of the phone circuitry: setting key +2+*+6+*+1+# (After startup it will whistler when the phone is failure, or the phone line is cut off , or the phone is short circuit)
21. close up of detection function of the phone circuitry: setting key +2+*+6+0+# (After startup it will not whistler when the phone is failure, or the phone line is cut off, or the phone is short circuit)
22. Inner 4.8V rechargeable battery: turn on the charge switch to “ON”, it will automatically charge when the voltage is lower, it will automatically stop charge when it is enough. (Only for XY-2000 model)
2. Method of use
Arrange defence and withdraw defence: you can pass the nofocusrect> button remote controller or “withdraw defence’ button on the host machine at home. When the master lock the door and go out , press the” ” button to arrange defence, when you go home you first press the “ button to withdraw defence and open the door. When you have a rest at night, you must press the “ ”button on the remote controller or “arrange defence” button on the host machine to arrange defence.
Urgent alarm function: when an accident happen, you press the “ “button on the remote controller or “help” button on the host machine, the system will enter urgent alarm status, whistle and automatically give an alarm. When you press “ ‘ button,it will be no whistle.
Deal with the alarm: when an accident happen and whistle, the syatem will automatically dial the phone you have set up,the called phone incept the alarm,press the “#,#”button to affirm it,the host machine will stop the dial and close the whistle, it will arrange defence again.If the called phone don’t press the “#,#” button,the system will hang up after play the record 4 times,and it will dial all phone repetition, until the called phone press the “#,#” button or “arrange defence” button on the host machine loose or the “ “ button on the remote controller loose. You can press the “*” to play the record.
Locale monitor: when the called phone incept the alarm, you can press the “6” button to monitor locale, press the “*” button to play the record repetition,”#,#” button to exit and come back to arrange defence. The monitor time is 32S,press the “6” button to add 32S,and so on.
Setting of remote:when the user go out and forget arrange defence,you can use the fixup phone or mobile to dial the host machine phone, you canb hear the “du,du” after six bell, the host machine automatically turn on,input the password and press “#”button, “B” show the password is true.If you don’t press button after input password in 15S,the host machine will automatically hang up.”du du du du du du” show the password is false after input password. (the host machine will hang up automatically three false). After input the true password you can operate according to the following:
“1” set the system is arrange defence status
“2” set the system is withdraw defence status
“3” set the system alarm with whistle
“4” set the system alarm without whistle
“5” start the whistle
“6” start the locale monitor
“#.#” affirm the instruction and exit the remote control
“*” play the record
3. Use method of remote controller:
The first arrange defence: press the ” “ button , the inner speaker pronounce a long “D” sound, it show all the defence area is arrange defence.
The second arrange defence:press the “ ” button for 2S,the speaker pronounce two short “D” sound, it show the outside area is withdraw defence, the inner area is arrange defence.
The withdraw defence button: press the “ ” , the speaker pronounce three short “D” sound, it show all area is withdraw defence, and stop all alarm in defence area or fire defence area.
Silence button: press the “ “, the speaker pronounce a long and a short “D” sound, it show the system is alarm without whistle.(the extension speaker is not on duty)
Urgent alarm button: press the” “button on the remote controller or “help” button on the host machine, the system will enter urgent alarm status.
Remark: when you set the alarm without whistle, you must press the arrange defence button and press the silence button. If you want Silence and Urgent alarm, you first press the silence button and press urgent alarm button. You can’t use the remote controller and host machine at the same time when you want silence function, otherwise this function will be in validation. |
|
|
|
|
