Specifications
SYSTEM INCLUDING 7 PARTS
- Main Unit
- Infrared Detector
- Door Magnet
- 2 Remote Control Keychains
- Alarm
- Telephone Line
- Adaptor
FUNCTION
- Record
- Store telephone nos. up to 6
- Automatically dail up reporting
Advantages
- Easy to install
- When the electricity cut off, the Back Up Battery will provide 6 hours energy.
When anybody going inside your home, the system will gives alarm and phone to the 6 telephone nos. which you save in the main until you confirm the message received.
A. FUNCTIONS:
1. Prevents the thief or anybody else from going inside your home. Gives alarm and phone calls to inform you there are
thief or somebody else inside your house.
Wireless remote control system, easy to install.
Can use Remote Control to start and dismiss the system. or through your Phone to dismiss the system.
Automatic sound signal to show the situation of the system.
Record your own message to call the police or somebody else through the phone numbers you have stored in the main unit.
Can store up to 6 telephone numbers.
Can call the police or somebody else with alarm signal or without alarm signal.
Emergency button available.
Digital code prevents others to interrupt the system.
24 hours working, can be used even under power fall outs or if the power supply is disconnected.
B. COMPONENT OF THE SYSTEM AND FEATURES:
1. MAIN UNIT: Receive signal to take action, alarm and make phone calls, with 10 hours usage rechargeable battery.
2. INFRARED DETECTOR: Gives signal to Main Unit when somebody is breaking in, detect distance – 6 meter, angle -120 .
Maxmium distance between Main unit and Infrared Detector is 100 meter ( open area )
3. DOOR MAGNET: Gives signal to Main Unit when the door is opened .
Maxmium distance between Main unit and Door Magnet is 100 meter ( open area )
4. REMOTE CONTROL KEYCHAIN: Used for starting and dismissing the system or activating the emergency call.
Maxmium distance between Main unit and Remote Control Keychain is 100 meter ( open area )
5. ALARM : Give 120 dB alarm sound.
6. TELEPHONE LINE : For phone call.
7. ADAPTOR : Output DC 9V. , 350 MA
C. SYSTEM INSTALLATION:
Main Unit installation :
· Place Main Unit near your telephone cable connection reach. Connect the Telephone Cable to the Main unit (5), and then connect telephone line to Main unit ( 6) and your telephone.
· Connect the Alarm input line to the back of Main Unit ( 3 ).
· Connect the power supply line (Adapter) to ( 1 ), after connected, the Lock / Unlock Status (7) and the power light ( 9 ) of the main unit will be on and a "BEEP" sound appears, Main unit starts to work. If user does not give any message (recording message) or there is no number in the Main Unit, it will give a "BEEP" sound every 30 seconds, to remind the user. This will continue until the message is recorded and phone number(s) are activated.
· Push the back up battery button to “ON” ( 10 ).
1 = DC Input 6 = Phone
2 = MIC 7 = Lock / Unlock Status
3 = Speaker Out 8 = Alarm Status
4 = Record button 9 = Power LED
5 = Line 10 = Back up Battery button
Door Magnet installation :
· Door Magnet is separated by Sender piece and Magnet piece. Use nails or double tape to fix it on the door and door frame, put a “A23” 12V battery inside. The side of the light of the Sender MUST BE pointing to the Magnet, the two parts SHOULD BE touching each other. Distance between Sender and Magnet MUST NOT be longer than 1.5 CM, and should be as near as possible.
· While open the door, the magnet piece move away from the Sender piece. The Alarm Status (1) Led flash and gives signal to the main unit.
Infrared Detector installation : Sender Magnet
· Open the case of the Infrared Detector, put a 9V battery inside, and then turns on switch inside the case. LED ( 1=Work Status ) will flash once. The detector MUST BE installed indoor, prevent to place under direct sunshine and high temperature. We suggest fixing it on the wall and about 1.6-M height from the floor. Fix it to the bounds where you want to scrutiny.
· The Infrared Detector will hold 30 seconds and re-start the function after gave signal to the main unit.
· The Battery Check (2) will flash, while the battery is weak.
D. SETUP THE MAIN UNIT OF THE SYSTEM:
1. Recording your message: Holding the recorder button down about 3 seconds, when main unit gives a "BEEP" sound, start to record your message, we advice to record the message talking about 20 CM from the Main Unit. Message time MUST NOT be longer than 10 seconds. After recording, release the button and you will hear a long "BEEP" and a short "BEEP" sound, the step of recording is finished.
Advise record simple message : “ It’s XXX’s home, XXX area, block XX, XX / floors, somebody gets in, please help. “
2. Set phone numbers: Pick up your phone and press the record button (4) once, then press the phone number following " #1* PHONE NUMBER # ". For example: the phone number is 888 8888, so you should press #1*8888888#. After inputting the number, main unit will give a long "BEEP" and a short "BEEP" sound, this means the setting is confirmed. Then you can put down your phone. The number "1" of "#1*" means the first number, the second number should be "#2*", the third number should be "#3*" etc. up to 6 phone numbers. When the System takes action, it will make the call in order 1 to 6.
3. REMARKS: If you use an “Extension” then you have to set after #1*X*NUMBER# ( X = the number with you dial to get a outside line) then set your number.
NO.
Your Telephone (for Call)
Submit
1
2345678
#1*2345678#
2
(9 for call out)5576666
#2*9*5576666#
3
(0 for call out)8888888
#3*0*8888888#
4
(01 Mobile)3232323
#4*013232323#
5
XXXXXXX
#5*XXXXXXX#
6
· REMARKS: You must set the phone number(s) again if the power supply is completely cut.and back up battery also used off .
E. USER GUIDE FOR ALARM SYSTEM:
System on and System off:
· When user leaves the house, lock all the doors and windows then press the "LOCK" button on the remote controller 1 second. Then you will hear a "BEEP" sound and the system alarm status light will be on. System will be on stand by after 40 seconds. The system will alarm and call the phone number when anybody goes into the house.
· When user is back home, press the "UNLOCK" button on the remote controller 1 second. Then you will hear a "BEEP" sound and the system alarm status light will be off. System is now dismissed. Now you can go inside the house.
Emergency Function:
· When user is in danger or there is an accident, press "Emergency" button on the remote controller 1 second. Then Main Unit will dial up the recorded phone numbers immediately and the alarm will go on.
How to handle when the system action:
· When the system is in action, the alarm will ring in the house continuously. Main Unit will call the number sets in the main unit.
· When user receives the phone call from the system, user will hear the message (that is recorded by the user) first.
· After listening to the whole message, press "#" button of the phone to confirm receiving. Then the system will stop alarming and stop to call other numbers. The system is still activated so in case there will be new movements in the house the alarm will go on again. If the first number set in main unit can not be connected at the moment or user do not press the "#" button to confirm, main unit will call the next number in order continually. Until one receiver press "#" to confirm, the system will continue to alarm and continue to call other numbers.
· Or press the “Unlock” button of the remote control keychain, the system will be dismissd.
REMARKS: If pressing the "#" bottom can not stop the action of the system, then user can press "#" bottom several times continually.
FAQ
How many door controller and movement controller can be added to the main unit?
As many as you like, you can add any quantity set up with your own code.
How far is the distance that the system works?
It works for sure maximum 100 meters. ( open area )
How long works the battery?
In both units are controllers (second led), if they light, the battery is low, please change battery and test your system.
The batteries in the product are for testing purpose. Suggest to use Alkaline Battery and work for longer time.
Door Magnet – A23, Inter-red Detector – 9V.
Whom shall I call first?
We suggest you to call at first a known neighbor, he can check immediately. Second is maybe your handy number, then you can start action.
Is it necessary to install all 6 numbers?
No, minimum 1 number MUST be installed.
How can I change a telephone number?
Just repeat install procedure.
Did my system disturb the system of my near neighbor, if he has also one?
It’s not possible, as he has a different code in his system.
When is the system active?
40 seconds after you start it with your remote control.
Can a small animal (fly) release the alarm?
No way, the system works only with warm blood individuals.
What about the animals like dog and cat?
When you have a dog, then you must place the movement unit in a higher position, for cat, you have the close the protected room.
Remarks :
Please reserve the label of the CODE number sticker behind Main Unit, Remote Control, Infrared Detector, Door Magnet. Additional components will be added based o |
|
|
|
|
